Supercharger Kit E46 M3 - 500

€5,100.00*

Prices incl. VAT plus shipping costs

Available in 14 days, delivery time 1-3 days

Product number: 75137

Product information "Supercharger Kit E46 M3 - 500"

Supercharger kit for BMW E46 S54 with Rotrex C38-91 unit

Performance range: 400-500hp

Contents:

Supercharger Rotrex C38-91 with 80mm pulley
External oilsystem - Expansion tank and lines
Mocal compressor oil cooler, 13 rows
1l Rotrex SF150 supercharger oil
Bracket system made of high-strength aluminum
SKF idler pulleys
Optibelt drive belt 6pk
Modificated airbox in exchange
Intake system made of innovative PA12-CF plastic
89mm K&N air filter
40mm aluminium blow off valve
HighFlow front mount intercooler 550 x 180 x 65mm
60mm charge air pipes hand made of aluminum
Black silicone hoses
SS-clamps
Installation instructions
Service book

Suitable for manual and automatic transmissions.

Suggested modifications to the driveline and peripherals:

Spark plugs for compressor operation
Bosch 470ccm fuel injectors
Air mass meter 89mm
Walbro 255lph fuel pump
MLS head gasket
ARP head studs
Reinforced clutch
Larger exhaust system (at least 2x65mm)
For road traffic: Schaper CV-set (crankcase ventilation)

* The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.

Engine:	S54

Recommended products

Spark plugs for M20 M30 High Boost

Spark plugs M20 / M30 High Boost 6 spark plugs for boost pressure from 1 bar Material: Iridium Manufacturer NGK

€130.00*

Spark plugs for M42 M44 High Boost

Spark plugs M42 / M44 High Boost 4 spark plugs for boost pressure from 1 bar Material: Platinum Manufacturer NGK

€90.00*

Spark plugs for M20 M30 Low Boost

Spark plugs M20 / M30 Low Boost 6 spark plugs for boost pressure up to 1bar of boost Manufacturer: NGK

€36.00*

Spark plugs for M42 M44 Low Boost

Spark plugs M42 / M44 Low Boost 4 spark plugs for boost pressure up to 1bar of boost Manufacturer: NGK

€24.00*

MAF Sensor 89mm

Performance range 400 - 700 PS (up to 1800kg / h) Connection diameter: 89mm Including connector, pins and 0.1m cable The MAF sensor is used to measure the air mass flow in order to be able to adapt the injection quantity precisely to the power requirement, the air pressure and the air temperatures. Original Bosch hot film air mass meter HFM-5-9.7 (housing including sensor) Bosch Art.-Nr.: 0 280 218 067 Compact design Light weight Fast response time Low power consumption Reverse flow detection Connection diameter: 89mm Connector: 5-pin Measuring range: 0-5 volts, up to 1800kg / h Connector: 1J0973775A Pinout: Pin 1 - IAT sensor output (not used on MS42 or MS43) Pin 2 - voltage input 12V (red/white) Pin 3 - common ground (black) Pin 4 - voltage input 5V (brown/white) Pin 5 - MAF sensor output (yellow Download: Calibration

€199.00*

Spark plugs for M50 M52 M54 High Boost

Spark plugs M50 / M52 / M54 High Boost 6 spark plugs for boost pressure from 1 bar Material: Platinum Manufacturer NGK

€120.00*

Spark plugs for M50 M52 M54 Low Boost

Spark plugs M50 / M52 / M54 Low Boost 6 spark plugs for boost pressure up to 1bar of boost Manufacturer: NGK

€36.00*