e46

Performance levels for the supercharger kits for the e46:

The smallest stage contains the Rotrex C30-94 supercharger, which delivers a maximum output of around 350hp.
The middle stage is operated with a larger Rotrex C38-91 supercharger, which delivers approx. 480hp maximum power (M3 ca. 500hp).
The large stage uses the largest Rotrex C38R supercharger, which delivers up to 600hp here (M3 ca. 650hp). The maximum possible increase in performance through a supercharger.

The information relates to the maximum engine power achieved with standard 2.5-2.8l engines with the respective kits. The specified engine performance can be increased by further tuning measures (timing, head machining, displacement expansion, etc.), since the superchargers used are planned with reserve potential. Talk to us about it.

Supercharger Kit E46 M3 - 500

Supercharger kit for BMW E46 S54 with Rotrex C38-91 unit Performance range: 400-500hp Contents: Supercharger Rotrex C38-91 with 80mm pulley External oilsystem - Expansion tank and lines Mocal compressor oil cooler, 13 rows 1l Rotrex SF150 supercharger oil Bracket system made of high-strength aluminum SKF idler pulleys Optibelt drive belt 6pk Modificated airbox in exchange Intake system made of innovative PA12-CF plastic 89mm K&N air filter 40mm aluminium blow off valve HighFlow front mount intercooler 550 x 180 x 65mm 60mm charge air pipes hand made of aluminum Black silicone hoses SS-clamps Installation instructions Service book Suitable for manual and automatic transmissions. Suggested modifications to the driveline and peripherals: Spark plugs for compressor operation Bosch 470ccm fuel injectors Air mass meter 89mm Walbro 255lph fuel pump MLS head gasket ARP head studs Reinforced clutch Larger exhaust system (at least 2x65mm) For road traffic: Schaper CV-set (crankcase ventilation) * The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.

€5,100.00*

Supercharger Kit E46 M3 - 650

Supercharger kit for BMW E46 S54 with C38R-112 unit Performance range: 450-650hp Contents: Supercharger Rotrex C38R-112 with 80mm 10pk pulley External oilsystem - Expansion tank and lines Mocal compressor oil cooler, 13 rows 1l supercharger oil Rotrex SF150 Bracket system made of high-strength aluminum Conversion kit pulleys 10pk Optibelt drive belt 10pk Modificated airbox in exchange Intake system made of innovative PA12-CF plastic 102mm K&N air filter 40mm aluminium blow off valve HighFlow front mount intercooler 550 x 180 x 65mm 60mm charge air pipes hand made of aluminum Black silicone hoses SS-clamps Installation instructions Service book Attention: the air conditioning compressor will be removed! Suitable for manual and automatic transmissions. Recommended modifications to the driveline and peripherals: Standalone ECU Link G4 S54 PnP Spark plugs for compressor operation Bosch 625ccm fuel injectors Walbro 340lph fuel pump Athena headgasket ARP headstuds DP pistons ZRP conrods Reinforced clutch Larger exhaust system (at least 2x65mm) * The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.

€7,100.00*

Supercharger Kit E46 M52tu M54 - 350

Supercharger kit for BMW E46 M52tu and M54 320i-330i with Rotrex C30-94 unit Performance range: 250-350hp Contens: Supercharger Rotrex C30-94 with 85mm pulley External oilsystem - Expansion tank and lines 1l Rotrex SF150 supercharger oil Bracket system made of high-strength aluminum SKF idler pulleys Optibelt drive belt 6pk Intake system made of innovative PA12-CF plastic 89mm K&N air filter 25mm aluminium blow off valve HighFlow front mount intercooler 550 x 180 x 65mm 60mm charge air pipes hand made of aluminum Black silicone hoses SS-clamps Installation instructions Service book Can be operated with the standard engine control unit - we offer programming for this. Suitable for manual and automatic transmissions. Recommended modifications to the driveline and peripherals: ECU programming by us (remote tuning) Spark plugs for compressor operation Bosch 380ccm fuel injectors Air mass meter 89mm Reinforced clutch Tubular exhaust manifold and larger exhaust system (at least 2x60mm) For racing purposes: Mocal compressor oil cooler, 13 rows * The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.

€4,500.00*

Supercharger Kit E46 M52tu M54 - 480

Supercharger kit for BMW E46 M52tu and M54 320i-330i with Rotrex C38-91 unit Performance range: 350-480hp Contents: Supercharger Rotrex C38-91 with 85mm pulley External oilsystem - Expansion tank and lines Mocal compressor oil cooler, 13 rows 1l Rotrex SF150 supercharger oil Bracket system made of high-strength aluminum SKF idler pulleys Optibelt drive belt 6pk Intake system made of innovative PA12-CF plastic 89mm K&N air filter 25mm aluminium blow off valve HighFlow front mount intercooler 550 x 180 x 65mm 60mm charge air pipes hand made of aluminum Black silicone hoses SS-clamps Installation instructions Service book Can be operated with the standard engine control unit - we offer programming for this. Suitable for manual and automatic transmissions. Suggested modifications to the driveline and peripherals: ECU programming by us (remote tuning) Spark plugs for compressor operation Bosch 470ccm fuel injectors Air mass meter 89mm Walbro 255lph fuel pump MLS head gasket ARP head studs Reinforced clutch Tubular exhaust manifold and larger exhaust system (at least 2x60mm) * The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.

€4,950.00*

Supercharger Kit E46 M52tu M54 - 600

Supercharger kit for BMW E46 M52tu and M54 320i-330i with C38R-112 unit Performance range: 450-600hp Contents: Supercharger Rotrex C38R-112 with 80mm 10pk pulley External oilsystem - Expansion tank and lines Mocal compressor oil cooler, 13 rows 1l supercharger oil Rotrex SF150 Bracket system made of high-strength aluminum Conversion kit pulleys 10pk Optibelt drive belt 10pk Intake system made of innovative PA12-CF plastic 102mm K&N air filter 40mm aluminium blow off valve HighFlow front mount intercooler 550 x 180 x 65mm 60mm charge air pipes hand made of aluminum Black silicone hoses SS-clamps Installation instructions Service book Attention: the air conditioning compressor will be removed! Suitable for manual and automatic transmissions. Recommended modifications to the driveline and peripherals: Standalone ECU Link G4 M50 PnP Spark plugs for compressor operation Bosch 625ccm fuel injectors Walbro 340lph fuel pump Athena headgasket ARP headstuds DP pistons ZRP conrods Reinforced clutch Tubular exhaust manifold and larger exhaust system (at least 2x65mm) For road traffic: Schaper CV-set (crankcase ventilation) * The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.

€6,100.00*